Hello Folks
I was trying to write a MSD85.1 (X6 E71 N63B44)
i follow the instructions on the bench and the pinout but it is not recognizing the ecu
any advice?
MSD85.1
-
- Posts: 1
- Joined: Wed Apr 13, 2022 1:14 pm
Re: MSD85.1
I have the same problem... I connect ECU MSD85 in bench and dont identyfi ECU..
Where is problem ?
I use scanmatic 2 pro
Regards
Where is problem ?
I use scanmatic 2 pro
Regards
- Thomas TGFlash
- Posts: 10
- Joined: Wed Jun 10, 2020 8:30 pm
Re: MSD85.1
Hello,
Please use 120 ohm resistor as shown in the wiring diagram.
Please use 120 ohm resistor as shown in the wiring diagram.