Page 1 of 1
No connection
Posted: Mon Oct 05, 2020 8:52 pm
by bmwm3power
Hello,
I use standard version and today try first car BMW F10 535d with standard enet adapter.
But i can't connect to car. I became error message "check cable connection."
I can connect the car to esys but tgflash no.
Why? must i use specific IP adress? i have a router between enet and computer.
Thanks
Re: No connection
Posted: Fri Oct 09, 2020 4:23 pm
by AlexGod
If you have connected ICOM before TGflash, then remove the battery for 10 minutes and it will help you.
Re: No connection
Posted: Fri Oct 09, 2020 9:08 pm
by bmwm3power
Thank you but i think thats not the problem. I tried a lot of cars with no icom connected before. No chance. Esys and ista work with enet adapter but tgflash not. ignition did not recognized.
Re: No connection
Posted: Sat Oct 10, 2020 11:27 am
by AlexGod
bmwm3power wrote: ↑Mon Oct 05, 2020 8:52 pm
i have a router between enet and computer.
Thanks
I think thas why you can't connect to car.
You must direct connect your computer with enet or j2534 to car, without routers
Re: No connection
Posted: Sun Oct 25, 2020 11:30 am
by bmwm3power
Thanks. Without router it works.
Re: No connection
Posted: Mon Jun 28, 2021 2:11 pm
by launchpro
Good afternoon, I also have a problem connecting via internet. The esys does not have a tgflash, I did not use the icom. How to set up tgflash and enet. Thank you!