No connection

General questions about TGFlash
Post Reply
bmwm3power
Posts: 3
Joined: Mon Oct 05, 2020 8:45 pm

No connection

Post by bmwm3power »

Hello,

I use standard version and today try first car BMW F10 535d with standard enet adapter.
But i can't connect to car. I became error message "check cable connection."

I can connect the car to esys but tgflash no.

Why? must i use specific IP adress? i have a router between enet and computer.

Thanks

AlexGod
Posts: 22
Joined: Fri Jun 12, 2020 10:46 am

Re: No connection

Post by AlexGod »

If you have connected ICOM before TGflash, then remove the battery for 10 minutes and it will help you.

bmwm3power
Posts: 3
Joined: Mon Oct 05, 2020 8:45 pm

Re: No connection

Post by bmwm3power »

Thank you but i think thats not the problem. I tried a lot of cars with no icom connected before. No chance. Esys and ista work with enet adapter but tgflash not. ignition did not recognized.

AlexGod
Posts: 22
Joined: Fri Jun 12, 2020 10:46 am

Re: No connection

Post by AlexGod »

bmwm3power wrote:
Mon Oct 05, 2020 8:52 pm


i have a router between enet and computer.

Thanks

I think thas why you can't connect to car.
You must direct connect your computer with enet or j2534 to car, without routers

bmwm3power
Posts: 3
Joined: Mon Oct 05, 2020 8:45 pm

Re: No connection

Post by bmwm3power »

Thanks. Without router it works.

launchpro
Posts: 1
Joined: Mon Jun 28, 2021 2:04 pm

Re: No connection

Post by launchpro »

Good afternoon, I also have a problem connecting via internet. The esys does not have a tgflash, I did not use the icom. How to set up tgflash and enet. Thank you!

Post Reply